Ncell APN Settings 2026: Fix Internet Not Working on Android & iPhone

Ncell APN settings 2026 — correct field values and quick configuration steps for Android & iPhone

Is your Ncell internet not working even after recharging your data pack? In most cases, this happens because your phone's APN (Access Point Name) settings are missing, incorrect, or got reset after a software update, SIM swap, or factory reset. The good news is that fixing it takes less than two minutes once you know the correct values.

In this guide, we'll walk you through the complete Ncell APN settings 2026 for both Android and iPhone, explain what each APN field means, and show you exactly how to manually configure your device to restore fast 2G/3G/4G internet on your Ncell SIM.

What Is an APN and Why Does It Matter?

APN stands for Access Point Name — it's the gateway your phone uses to connect to your mobile network's data services and, through it, the internet. Every telecom operator, including Ncell, has its own unique APN configuration. If this setting is wrong, missing, or has extra spaces/typos, your phone will show full network signal but mobile data simply won't load any page, even with an active data pack.

Common Reasons Ncell Internet Stops Working

• APN settings got reset after a phone software/firmware update.
• You recently swapped or replaced your Ncell SIM card.
• You manually edited network settings or used another operator's APN previously.
• Mobile data or data roaming is toggled off in phone settings.
• Your data pack or bundle has expired or run out of balance.
• Network mode is set incorrectly (e.g., forced to 2G only).

Ncell APN Settings 2026 (Standard Values)

Use the table below to manually configure your Ncell APN. These values work across 2G, 3G, 4G, and VoLTE-enabled devices — you do not need separate settings for different network types.

Field	Value
Name	Ncell Internet
APN	web
Proxy	Not set
Port	Not set
Username	Not set
Password	Not set
Authentication type	None
APN type	default,supl
APN protocol	IPv4/IPv6
MCC	429
MNC	2

How to Set Up Ncell APN on Android

1. Open Settings on your Android phone.
2. Go to Network & Internet (or "Connections" on Samsung devices).
3. Tap Mobile Network → Access Point Names (APN).
4. Tap the "+" or "Add" button to create a new APN.
5. Enter Name: Ncell Internet and APN: web — leave all other fields as default unless stated above.
6. Tap the menu (⋮) icon and select Save.
7. Make sure the newly created APN is selected/ticked as the active APN.
8. Restart your phone and turn on mobile data to test your connection.

How to Set Up Ncell APN on iPhone

On most iPhones, APN settings are managed automatically through the carrier settings update. However, if your internet isn't working, follow these manual steps:

1. Go to Settings → Mobile Data (Cellular).
2. Tap Mobile Data Network (you may need to insert your Ncell SIM first for this option to appear).
3. Under the Mobile Data section, enter APN: web and leave Username/Password blank.
4. If prompted for MMS settings as well, you can use the same APN value.
5. Exit Settings, then toggle Airplane Mode on and off to refresh the network connection.
6. Check for a carrier settings update by going to Settings → General → About, since iOS sometimes prompts an automatic Ncell configuration update.

Get Ncell APN Settings Automatically via SMS

If you don't want to configure APN manually, Ncell also allows you to receive the correct settings directly on your phone:

• Send a message with the text ALL to 9595 from your Ncell number.
• You'll receive a configuration message — tap to install/save the settings automatically.
• Restart your device after the settings are applied.

Still Not Working? Try These Additional Fixes

• Check your data balance by dialing the Ncell balance check USSD code or checking the My Ncell app.
• Toggle Airplane Mode on for 10 seconds, then turn it back off to refresh your network registration.
• Restart your phone after applying any APN changes — this is required for settings to take effect.
• Re-insert your SIM card to ensure proper contact with the SIM tray.
• Update your phone's software, since outdated firmware can sometimes cause APN/network bugs.
• Check network mode — make sure it's set to "4G/3G/2G Auto" rather than locked to a single network type.
• If nothing works, contact Ncell Customer Care at 9990 or visit your nearest Ncell center to rule out SIM or account-level issues.

Frequently Asked Questions (FAQs)

Q1. What is the Ncell APN for 2026?
The standard Ncell APN value is web, which works across 2G, 3G, and 4G networks.

Q2. Why is my Ncell internet not working even with a data pack active?
This is usually due to incorrect or missing APN settings, mobile data being switched off, or the network mode being restricted to an unsupported type.

Q3. Do I need different APN settings for 4G compared to 3G?
No. Ncell uses the same APN ("web") for 2G, 3G, and 4G — you don't need to change settings when switching network modes.

Q4. How can I get Ncell APN settings sent directly to my phone?
Send "ALL" as an SMS to 9595 from your Ncell number to receive the configuration automatically.

Q5. My iPhone still shows no internet after entering the APN. What should I do?
Try toggling Airplane Mode, restarting the device, checking for a carrier settings update, and confirming your data plan is active before contacting Ncell support.

Final Thoughts

Fixing Ncell internet issues is usually as simple as correcting your APN settings to the standard value: web. Whether you're on Android or iPhone, the steps above should get your mobile data working again within minutes. If the problem persists after trying every fix, it's likely an account, SIM, or network coverage issue best resolved by Ncell customer support.

Disclaimer: APN configuration values are based on Ncell's publicly available standard settings and may vary slightly by device model or region. If settings change, always verify the latest configuration via the official Ncell SMS service (ALL to 9595) or Ncell customer care.